Sharp MD-ZV30 Operation Manual page 27

<P=005>
(Continued)
DISC-1
1
DISC-2
2
DISC-3
3
CD PLAY
ON/STAND-BY CD
VOLUME
TUNER NAME /
3D SURROUND
MODE ON/OFF (BAND) TRACK START TOC EDIT
1 2 3
CD MD DIGITAL EDIT
2
1 TRACK
1 2 3 4 5 6 7 8 9 10 11 12
(To combine the fourth track and
the fifth track)
2
1 2 3 4 5 6 7 8 9 10 11 12
3
1 2 3 4 5 6 7 8 9 10 11 12
4
TOC
1 2 3 4 5 6 7 8 9 10 11
Combine
1
Whilst in the stop mode, select the second of the two adjacent
TUNING
CURSOR
MD tracks you want to combine using the jog dial.
REC
TIMER /
ENTER
DELETE DISPLAY
Or start playing the second of the two tracks you want to
combine, and then press the MD
The unit will enter the pause mode.
1 3,4 1
2
Press the NAME/TOC EDIT button, and then select "COM-
BINE" using the jog dial.
3
Within 10 seconds, press the ENTER button.
To cancel the operation, press the MD
4
Press the ENTER button again.
REMAIN
The two tracks are combined, and the unit is stopped at the
beginning of the combined track.
The numbers assigned to the tracks following the combined
track are automatically decreased by one.
REMAIN
When both tracks have a name:
When only the first track has a name
used.
When only the second of the two tracks has a name
name will be used.
When both tracks have a name
REMAIN
will be used.
To combine two non-contiguous tracks:
(Example: the first and third tracks)
Move the third track to the second track using the MOVE func-
REMAIN
tion. (Page 26)
Then, combine the first and second tracks using the COMBINE
function.
Notes:
Tracks recorded from analogue inputs cannot be combined
with tracks recorded from CDs or MDs using the digital inputs.
Tracks recorded in the stereo mode cannot be combined with
tracks recorded in the monaural long-play mode.
Tracks where either track's recording time is less than 15
seconds may not be combined.
E-25
MD-ZV30H TINSZ0217AWZZ
button.
0 6
button.
That name will be
That
The name of the first track