Sharp MD-ZV30 Operation Manual page 12

<P=005>
(Continued)
DISC-1
1
DISC-2
2
DISC-3
3
CD PLAY
ON/STAND-BY CD
VOLUME
3D SURROUND TUNER NAME /
TRACK START
MODE ON/OFF (BAND) TOC EDIT
1 2 3
CD MD DIGITAL EDIT
CD
1
2
1 2 3
3
CD PLAY
MD/CD/TUNER DIRECT KEY
1 2 3 4 5
6 7 8 9 10/0
ST-MODE TUNER MD
10 BAND
PROGRAM CLEAR P-MODE
REC AUTO
REC
MODE MARK
CD
1 2 3
1 2 3
3D SURROUND
SLEEP DISPLAY TIME
MODE ON/OFF
1
BASS/
ON/
AUX VOLUME
STAND-BY TREBLE
When choosing a CD for playback
Press one of the buttons CD PLAY 1 - CD PLAY 3 to select the
TUNING
CURSOR
MD
REC
CD you want to listen to.
TIMER / ENTER
DELETE DISPLAY
Only the selected CD will be played back.
When selecting
disc tray 1
1
2
3
Notes:
If any disc tray is open, it will be automatically closed.
If the CD
C D
be performed from the first track of disc 1, even after disc 2
or disc 3 has been selected.
2 3
Direct playback:
If a CD is loaded in the unit, pressing the CD
the power on and begins playback.
Cautions:
Do not carry the unit whilst CD's are in the trays or a MiniDisc
is loaded. The discs may come loose inside the unit and be
damaged or cause damage to the unit. This may also cause
malfunctions.
Do not place two CDs in one disc position.
Do not push the disc tray whilst it is moving.
Do not attempt to push the disc tray by hand. This may cause
malfunctions.
If power fails whilst the tray is open, wait until the power
supply returns or gently push the tray manually to close it.
If the disc tray is stopped forcibly, "TRAY ERROR" will appear
on the display and the unit will not function.
If this occurs, turn off the ON/STAND-BY switch and turn it
on again.
If TV or radio interference occurs during CD operation, move
the unit away from the TV or radio.
If a disc is damaged, dirty, or loaded upside down, the disc
will be skipped and the next disc will be automatically played.
If the CDs are dirty or have label adhesive on their surface,
make sure to clean them before loading. If a rental CD is
loaded or a label has been peeled off from the CD, the sur-
face may be dirty or sticky. Wipe any dirt from the surface.
If a dirty CD is loaded and played back, it may become dam-
aged, or it could become stuck in the unit.
If the CD
is pressed when a disc tray is open, the disc tray will be
automatically closed. Be careful not to catch your finger.
If the machine is shaken by impact or vibration, playback may
be disrupted. If the playback volume of a CD is raised ex-
cessively, playback may be disrupted. If this happens, lower
the playback volume.
E-10
MD-ZV30H TINSZ0217AWZZ
When selecting
disc tray 2
1
2
3
button is pressed, continuous playback will
0 6
0 6
button, CD PLAY 1 - 3 button or the
0 6
When selecting
disc tray 3
1
2
3
button turns
button
7