Sharp MD-ZV30 Operation Manual page 43

SM <P=001>
(Continued)
When an error message is displayed, proceed as follows:
Error messages
BLANK MD
Can't COPY
Can't EDIT
Can't REC
Can't T REC Timer recording is impossible or there is no
CH ERROR
DEFECT Since this disc has scratches on it, the recording
operation was skipped.
DISC ERR The disc is damaged.
A TOC is not written on the MD or there is
something wrong with data.
DISC FULL The disc is out of recording space.
EDIT OVER There is no space to make CD editing on the disc.
MD ERROR No operation
MECHA ERR* There is a mechanical problem and the disc is not
(*: Number or sym- working properly.
bol)
NAME FULL The number of characters for the disc name or track
name exceeds 40.
NO DISC A disc has not been loaded.
The disc data cannot be read.
NOT AUDIO The data recorded on this disc is not audio data.
PLAYBACK MD You tried to record on a playback-only disc.
PROTECTED The disc is write protected.
TEMP OVER The temperature is too high.
TOC ERR* The disc is damaged.
TOC information cannot be read.
(*: Number or sym-
bol) MD not specified.
TOC FULL* There is no space to programme track numbers.
(*: Number or sym-
bol)
TOC FULL 1 There is no space left for recording character
information (track names, disc names,etc.).
TOC W ERROR Recording is impossible.
TRAY ERROR The CD tray operates incorrectly.
U TOC ERR* TOC information recorded on the MD does not
(*: Symbol) match the MD specifications or it cannot be read.
U TOC W ERR The TOC information could not be created properly
due to a mechanical shock or to scratches on the
disc.
? DISC
0 0:00
Meaning
Nothing is recorded.
You tried to record from a copy-protected disc.
A track cannot be edited.
Recording cannot be performed correctly due
to vibration or shock in the unit.
available space on the MD.
There is something wrong with the CD changer.
The data contains an error.
Music is not being recorded.
E-41
MD-ZV30H TINSZ0217AWZZ
Remedy
Replace the disc with a recorded disc.
Replace it with a regular disc that can be
copied.
Change the stop position of the track and then
try editing it.
Re-record.
Replace it with another disc.
Turn the power off and then back to on, and press
the button.
0 6
Replace the disc with another recordable disc.
Reload the disc or replace it.
Replace the disc with another recordable disc.
Replace it with a disc that has enough time to
record.
Contact the shop where you purchased the unit.
Turn off the power, and press the
7
Shorten the disc or track name.
Load a disc.
Reload the disc.
Select another track.
Replace the disc.
Replace it with a recordable disc.
Move the write protection tab back to its original
position.
Turn off the power, and wait for a while.
Replace it with another disc.
Replace it with another recordable disc.
Replace it with another recordable disc.
Contact the shop where you purchased the unit.
Unplug the AC power lead, plug it back, and then
turn the power on.
Replace it with another disc.
Erase all of the tracks, and try recording.
Turn off the power, and try to write the TOC again.
(Remove any source of shock or vibration whilst
writing.)
Replace it with another disc.
Replace the disc with another recordable disc.
button.