Sharp MD-ZV30 Operation Manual page 26

<P=004>
(Continued)
DISC-1
1
DISC-2
2
DISC-3
3
CD PLAY
ON/STAND-BY CD
VOLUME
3D SURROUND TUNER
TRACK START
MODE ON/OFF (BAND)
1 2 3
CD MD DIGITAL EDIT
1
12
4 5 6 7 8 9 10 11 12
(To divide the fourth track into two)
2
4 5 6 7 8 9 10 11 12
3
4 5 6 7 8 9 10 11 12
4
TOC
1 2 3 4 5 6 7 8 9 10 11 12 13
Divide
1
Play the track which you want to divide into two, and press
TUNING
CURSOR
MD
REC
the MD
NAME / TIMER / ENTER
TOC EDIT DELETE DISPLAY
the track.
The unit will enter the pause mode.
2
2 3,4 1
Press the NAME/TOC EDIT button, and then select "DIVIDE"
using the jog dial.
3
Within 10 seconds, press the ENTER button.
To cancel the operation, press the MD
4
Press the ENTER button again.
4 0dB OVER
The track is divided, and the unit is stopped at the beginning
of the second of the two tracks.
The numbers of the tracks which come after the divided track
are automatically increased by one.
When a track which has been given a name is divided, the
two new tracks will have the same name and date. If the
"TOC FULL" message is seen, the second track may not be
given a name. (Page 39)
Notes:
This unit can hold up to 255 tracks. However, even if the
number of tracks assigned has not reached 255, it might not
be possible to make any further divisions of tracks. (Page 39)
This function cannot be used whilst a programme is being
entered ("PRGM" is lit: Page 16) or whilst in the random play
mode ("RANDOM" is lit: Page 15). First, cancel the pro-
gramme or random play mode before trying to use this func-
tion.
REMAIN
E-24
MD-ZV30H TINSZ0217AWZZ
button at the point where you want to divide
0 6
button.