Table of Contents
Advertisement
Main menu
Submenu 1
Settings
Parental Lock
Hard Disk
Common
Interface
(optional)
Guides &
User Guide
Demos
Demos
Navigation in the Menu
You use the buttons on the remote control to operate your set-top box:
M
Open the main menu with the "home" button.
w
You can use the up and down arrow buttons to move the selection
marker on the screen up and down to the entry you want to select.
x
You can use the left and right arrow buttons to jump to the next higher
or next lower menu level.
o
Pressing the "OK" button selects the entry that is marked on the screen.
If you have changed a setting, your change is confirmed and stored with
this button.
e
Use the "X" button to close the menu.
Entering Text and Digits
Use the 0 to 9 buttons on your remote control to enter text. As you enter text, you can
see on screen which characters can be entered with the depressed button.
#
Keep pressing the relevant button until the desired character is selected.
After approx. 1 second, the selected character appears in the input box.
Repeat this process until the desired name has been entered fully.
x
Use these buttons to change the position of the input marker.
D
Select this button to delete a character.
Submenu 2
Lock Device
Change PIN
Delete All Recordings
Format hard disk
HDD Standby
HDD Information
Contents
Notes on Operation
Submenu 3
29
Advertisement
Table of Contents
