Setting Up The Charger; Connecting The Charger - Gigaset S810H User Manual

Hide thumbs Also See for Gigaset S810H:
Table of Contents

Advertisement

First steps

Setting up the charger

The charger is designed for use in dry rooms in a temperature range of +5°C to +45°C.
¤ Place the charger on a level, non-slip surface or mount it on the wall (¢ page 46).
Please note
Pay attention to the range of the base.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside buildings.
The range is reduced when Eco Mode (¢ page 29) is activated.
The phone's feet do not usually leave any marks on surfaces. However, due to the multi-
tude of different varnishes and polishes used on today's furnishings, the occurrence of
marks on the surfaces cannot be completely ruled out.
Please note:
u Never expose the telephone to the influence of heat sources, direct sunlight or other
electrical devices.
u Protect your Gigaset from moisture, dust, corrosive liquids and fumes.

Connecting the charger

2
To disconnect the plug from the charger,
press the release button
the plug 4.
6
¤ Connect the flat plug from the power
adapter 1.
¤ Plug the power adapter into the plug
1
socket 2.
and disconnect
3
4
3

Advertisement

Table of Contents
loading

Table of Contents