Table of Contents
Advertisement
Using Bluetooth devices
Your Gigaset handset can communicate wire-
lessly via Bluetooth™ with other devices using
this technology.
Before you can use your Bluetooth device, acti-
vate Bluetooth, ensure the devices are visible
and then register the handset.
You can register one Bluetooth headset to the
handset. You can also register up to five data
devices (PCs, PDAs and mobile phones) to send
and receive directory entries as vCards or
exchange data with the computer (¢ page 45).
To use the phone numbers, dialling codes
(country and area code) must be stored in the
directory (¢ page 39).
You will find a description of how to operate
your Bluetooth devices in the user guides for
these devices.
Please note
u You can operate headsets on your hand-
set that have the headset or handsfree
profile. If both profiles are available, the
handsfree profile is used to communi-
cate.
u It can take up to five seconds to estab-
lish a connection between your handset
and a Bluetooth headset. This applies
both when a call is accepted using the
headset or transferred to the headset,
and when a number is dialled from the
headset.
Activating/deactivating Bluetooth
mode
ò
v
¢
¢ Activation
§Change§
Press
to activate or deactivate Blue-
³
tooth mode (
= activated).
ò
In idle status, the
icon on the handset shows
that Bluetooth mode is activated (¢ page 2).
Registering Bluetooth devices
The distance between the handset in Blue-
tooth mode and the activated Bluetooth
device (headset or data device) should be no
more than 10 m.
Using Bluetooth devices
Please note
u If you register a headset, any headset
that is already registered will be over-
written.
u If you would like to use a headset with
your handset that is already registered
to another device (e.g., to a mobile
phone), please deactivate this connec-
tion before you start the registration
process.
ò
v
¢
¢ Search for Headset / Search Data
Device
The search can take up to 30 seconds.
Once the device has been found, its name is
shown on the display.
§Options§
Press the display key.
Trust Device
Select and press
~
Enter the PIN for the Bluetooth
device you want to register and
§OK§
press
The device is saved in the list of known devices.
Cancelling/repeating current search
To cancel search:
§Cancel§
Press the display key.
Repeat search if necessary:
§Options§
Press the display key.
Repeat Search
Select and press
Editing the list of known (trusted)
devices
Open list
ò
v
¢
¢ Known Devices
A corresponding icon appears next to each
device name in the list displayed:
Icon
Meaning
ô
Bluetooth headset
õ
Bluetooth data device
If a device is connected, the corresponding
icon is shown in the header of the display
ò
instead of
.
§OK§
.
.
§OK§
.
33
Advertisement
Table of Contents
