Table of Contents
Advertisement
1. Engine stop switch"
During the first few rides, practice using the
stop switch so that you can react quickly in an
emergency.
ESU10661
Headlight beam switch
"LIGHTS"
Push the headlight beam switch to change the
headlight to high beam "HI" or to low beam
"LO".
1. Headlight beam switch "LIGHTS"
2. High beam "HI"
3. Low beam "LO"
ESU12710
Grip warmer/rear suspension
compression damping and
thumb warmer adjustment
switches
These switches are used to adjust the grip
warmer, rear suspension compression damp-
ing and thumb warmer levels.
"
Control functions
See "Fuel meter, grip warmer level indicator,
rear suspension compression damping level
indicator, and thumb warmer level indicator"
on page 14 for detailed information.
1. Grip warmer/rear suspension compression
damping adjustment switch
1. Thumb warmer adjustment switch
ESU10690
Auxiliary DC jack
The auxiliary DC jack is located in the front
panel and can be used for accessories.
NOTE:
The auxiliary DC jack cannot be used if the
engine is not running.
To use the auxiliary DC jack
1.
Start the engine.
2.
Open the auxiliary DC jack cap, and then
insert the accessory power plug into the
jack.
19
Advertisement
Table of Contents
