Table of Contents
Advertisement
1. Grip warmer/rear suspension compression
damping adjustment switch
Adjusting the rebound damping force
The rebound damping force can be adjusted
by turning the adjusting dial.
To increase the rebound damping force, turn
the adjusting dial in direction (a). To decrease
the rebound damping force, turn the adjusting
dial in direction (b).
1. Rebound damping force adjusting dial
Rebound damping setting:
Minimum (soft):
30 click(s) in direction (b)*
Standard:
20 click(s) in direction (b)*
Maximum (hard):
10 click(s) in direction (b)*
* With the adjusting dial fully turned
lightly in direction (a)
ESU11050
Adjusting the control rod
The weight transfer can be adjusted by turn-
ing the control rod adjuster or adjusting nut.
Control functions
1.
Loosen the locknut.
2.
Turn the control rod adjuster in direction
(a) to increase weight transfer or direction
(b) to decrease weight transfer.
1. Locknut
2. Control rod adjuster
EWS00180
WARNING
Never adjust the control rod beyond the
range of the scale on the special wrench.
3.
Check the control rod adjuster length us-
ing the scale on the special wrench in-
cluded in the owner's tool kit as shown.
Make sure that the rim of the control rod
body is within the range of the scale.
1. Special wrench
2. Adjuster length
3. Rim
4. Scale range
4.
Tighten the locknut while holding the con-
trol rod adjuster in place.
27
Advertisement
Table of Contents
