Table of Contents
Advertisement
Control functions
1. Grip warmer/rear suspension compression
damping adjustment switch
1. "MODE" button
1. Thumb warmer adjustment switch
NOTE:
The grip warmer, rear suspension com-
G
pression damping, and thumb warmer lev-
els are displayed for 5 seconds after
releasing the corresponding adjustment
switch, then the display switches to the fuel
meter.
16
The top segment of the fuel meter, grip
G
warmer level indicator, rear suspension
compression damping level indicator, and
thumb warmer level indicator flashes once
when the corresponding adjustment reach-
es the maximum level. The bottom segment
of the fuel meter, grip warmer level indica-
tor, rear suspension compression damping
level indicator, and thumb warmer level in-
dicator flashes once when the correspond-
ing adjustment reaches the minimum level.
When the engine is started, the grip warm-
G
er, rear suspension compression damping,
and thumb warmer levels are set to the lev-
els selected when the engine was stopped.
To adjust the grip warmer temperature
1.
Push the "MODE" button and make sure
that the grip warmer indicator is dis-
played. If the rear suspension indicator is
displayed, push the "MODE" button again
to display the grip warmer indicator.
1. Grip warmer indicator "
2. Rear suspension indicator " "
2.
To raise the temperature, press the grip
warmer/rear suspension compression
damping adjustment switch to "HI", and to
lower it, press the switch to "LO".
"
Advertisement
Table of Contents
