Yamaha RX10GTX Owner's Manual page 70

Periodic maintenance
1. Left adjusting nut
2. Right adjusting nut
Shifted to right
1. Forward
2. Gap
3. Slide runner
4. Drive track
5. Slide metal
Shifted to left
1. Forward
2. Gap
3. Slide runner
4. Drive track
5. Slide metal
64
5. Adjust the drive track deflection to speci-
fication.
Drive track More than
deflection specified
Left adjusting
nut
Right adjust-
ing nut
ECS00591
CAUTION:
The right and left adjusting nuts should be
turned an equal amount.
6. Recheck alignment and deflection. If nec-
essary, repeat steps 3 to 5 until the prop-
er adjustment is achieved.
7. Tighten the rear axle nut.
Rear axle nut tightening torque:
75 Nm (7.5 m·kgf, 54 ft·lb)
Slide runners
Check the slide runners for wear and dam-
age.
If the slide runners reach the wear limit, they
should be replaced.
1. Slide runner
2. Wear limit height
Slide runner wear limit height:
10.5 mm (0.41 in)
Less than
specified
Turn in Turn out
Turn in Turn out