Yamaha RX10GTX Owner's Manual page 69

1. Drive track deflection
Standard drive track deflection:
RX10GT 30.0–35.0 mm (1.18–1.38 in)
RX10GTA 30.0–35.0 mm (1.18–1.38
in)
RX10LTGT 25.0–30.0 mm (0.98–1.18
in)
RX10LTGTA 25.0–30.0 mm (0.98–1.18
in)
3. If the deflection is incorrect, adjust the
drive track.
Adjusting the drive track
EWS00500
WARNING
Be sure to have a Yamaha dealer make
G
this adjustment.
Support the snowmobile securely on a
G
suitable stand before working under-
neath the snowmobile.
Operate the engine in a well-ventilated
G
area.
1. Lift the rear of the snowmobile onto a suit-
able stand to raise the drive track off the
ground.
2. Loosen the rear axle nut.
Periodic maintenance
1. Rear axle nut
3. Start the engine and rotate the drive track
one or two turns. Stop the engine.
4. Check the drive track alignment with the
slide runners. If the alignment is incorrect,
align the drive track by turning the left and
right adjusting nuts.
1. Slide runner
Drive track Shifted to
alignment
Left adjusting
Turn out
nut
Right adjust-
ing nut
Shifted to left
right
Turn in
Turn in Turn out
63