Confirming The Registration Shift Setting In The Voice Display - Yamaha Electone Stagea ELS-01 Owner's Manual

Reference Page
Saving Two or More
Registration Banks to One
Song (page 111)
NOTE
When you play the song
using Next Regist. function,
always press the [F] (Play)
button in the M.D.R. display
to start the song and activate
these functions.
6
The [CUSTOM] (Custom
Play) button will not activate
the Next Regist. function.
NOTE
If the next Registration data
contains User voices and/or
VA custom voices, the
Electone may produce no
sound for a few seconds
while loading the
Registration.
NOTE
When you use the Next
Regist function during
Rhythm playback, Rhythm
Sequence and User Rhythm
cannot be loaded.
88 ELS-01/01C Owner's Manual
DELETE: For deleting a Registration number at the current cursor position. To delete the
unnecessary number, move the cursor to a numbered position and press [DELETE] in the
display.
CLEAR: For erasing all current user Registration Shift settings.
After selecting [CLEAR], a message appears prompting confirmation of the operation.
Select [CLEAR] to clear all data. The message "Clear all data" momentarily appears in the
display and returns to the previous display.
Select [CANCEL] to abort the operation.
3
SHIFT END
Determines how to end the Registration shift function.
STOP: Selects the last Registration and quits the operation.
TOP: After the last preset is reached, the first preset is called up again, starting the sequence
over again from the beginning.
NEXT REGIST: After the last preset is reached, the next Registration data in the Song is
called up. This function is available only when two or more Registration data sets are saved
in one Song. This function is handy when you need to play a song with more than sixteen
Registrations.
The Shift End mark (
entered when Top or Next Regist is selected as the Shift End.
Confirming the Registration Shift setting in the Voice
Display
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
You can confirm the Registration Shift mode in the Voice Display, Page 1.
Press the [VOICE DISPLAY] button on the panel to call up the Voice
Display.
The Registration Shift mode is shown at the bottom right of the display.
DISPLAY SELECT
VOICE A.B.C.
DISPLAY M.O.C. MDR
FOOT
SWITCH UTILITY INTERNET
RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE
U.ORGAN L.ORGAN ROTARY SP
FLUTES SPEED
FLUTES
) will automatically be put at the end of the Registrations you