Connection Examples - External Devices; Using Headphones; Playing The Sounds Of The Electone Through An External Audio; System - Yamaha Electone Stagea ELS-01 Owner's Manual

2
Connection Examples – External Devices
Before connecting the Electone to other electronic components, turn off the
power to all the components. Before turning the power of the components
on or off, set all volume levels to minimum (0). Otherwise, electrical shock or
damage to the components may occur.

Using Headphones

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
To use headphones, connect them to one of the PHONES jacks (standard 1/4" phone
jacks). Two people can enjoy listening to the Electone together by connecting two pairs
of headphones to the two jacks.
PHONES
Playing the Sounds of the Electone Through an
External Audio System
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
By using the AUX OUT jacks, you can connect your Electone to external speakers. If
you're connecting the Electone to a mono device, use only the AUX OUT L/L+R jack
(standard phone).
Speaker (Left)
AUX OUT L/L+R R
Speaker (Right)
ELS-01/01C Owner's Manual
1 3
211