Knee Lever; Controlling Rotary Speaker; Controlling Sustain - Yamaha Electone Stagea ELS-01 Owner's Manual

Reference Page
Rotary Speaker (page 48)
10
Reference Page
Sustain (page 47)
188 ELS-01/01C Owner's Manual

Controlling Rotary Speaker

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
You can control the Rotary Speaker effect (on/off ) by using the Left Footswitch.
When the [Rotary Speaker] button is selected in this display and you press the
Footswitch, the Rotary Speaker effect is switched on or off. This function corresponds
to the [ROTARY SP SPEED] button on the panel. To use this function, you'll need to
make the appropriate Rotary Speaker settings for each Voice section or Organ Flute
Voice. For details, see page 48.
2

Knee Lever

The Knee Lever, located on the underside of the keyboard panel, can be used to turn
one of the following on and off: Sustain effect, Melody On Chord function, Lead Slide
effect, or Solo function.

Controlling Sustain

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
You can control on/off status of sustain for the Upper and Lower keyboards by using
the Knee Lever. Sustain for the Pedalboard cannot be controlled.
1
Make sure that the Upper and/or Lower Sustain
buttons have been turned on.
2
Fold the Knee Lever down.
Sustain is off when the Knee Lever is folded down.
Folding down
SUSTAIN
UPPER
(KNEE)
LOWER PEDAL
(KNEE)