Connecting A Microphone Or Guitar - Yamaha Electone Stagea ELS-01 Owner's Manual

NOTE
When you're not sure which
position is the best, first set it
to LINE. If the output level is
too low, switch to the MIC
position.
13
214 ELS-01/01C Owner's Manual

Connecting a Microphone or Guitar

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
By connecting a microphone to the Electone, you can enjoy singing along with your
own performance. The Electone outputs your vocals or guitar sounds through the
built-in speakers.
1
Connect your microphone to the MIC./LINE IN jack (standard
1/4"phone jack).
A dynamic microphone is recommended.
2
Set the MIC./LINE switch to the MIC position when connecting a
microphone, or the LINE position when connecting a guitar or
other high-level output device.
MIC. LINE
When connecting
a microphone
3
Use the INPUT VOLUME knob to set the microphone volume.
MIC./LINE IN
MIC. LINE
When connecting
a guitar
INPUT
VOLUME
MIN MAX