Connection With Computer - Yamaha Electone Stagea ELS-01 Owner's Manual

3

Connection with Computer

By using an optional MIDI interface such as the UX16, you can connect the Electone
to the computer, with the MIDI IN/OUT terminals on the instrument. Connect the
Electone and the MIDI Interface with two standard MIDI cables (one connecting the
OUT terminal on the Electone to the MIDI IN terminal on the interface, and the
other connecting the IN terminal on the Electone to the MIDI OUT terminal on the
interface). Connect the MIDI interface to the computer with a USB cable.
Connecting your Electone to a computer opens up a whole new world of musical
possibilities. You can save your original songs to computer and create notation (score
writing application or sequencing software is needed), and even upload your original
Electone song data to your own website, to promote your talents or share songs with
your friends. You can also control the Electone from the computer, for example, by
playing a MIDI file on the computer to play back the sounds of your Electone.
IN OUT
MIDI
MIDI OUT MIDI IN
MIDI Interface
(for example, UX16)
Computer
ELS-01/01C Owner's Manual
NOTE
Depending on your particular
MIDI interface, you may have
to connect the MIDI Interface
and the computer with a
serial cable.
NOTE
When you are using the
M.D.R., MIDI data cannot be
transferred to/from the
computer.
217
1 3