Yamaha Electone Stagea ELS-01 Owner's Manual page 147

3
Select a section to which you want to enter or edit the rhythm
pattern.
Pressing the SECTION button on the display calls up the Section Select pop-up
menu. After selecting the desired section, the pop-up menu automatically closes.
You can play the selected section by pressing the Rhythm [START] button on
the panel. You can also change the section while the rhythm is playing. For
details on muting the accompaniment part, refer to page 162.
4
Sets the measure length of the rhythm pattern.
Pressing the MEASURE button on the display calls up the Measure Select pop-
up menu. Select the desired measure in the pop-up menu. If you select Break or
Fill In as the section, the measure cannot be changed.
5
(If necessary) Set the Metronome, Part Assemble, and Part Clear
parameters.
1
METRONOME
Turns the metronome click on or off. When set to ON, the metronome sounds on each
beat of the measure (for example, three times per measure in 3/4 time) to serve as a
rhythmic guide when programming patterns. Set to On here with Real Time Write.
2
3
1
Reference Pages
Step Write and Real Time
Write (page 149)
Entering Percussion Sounds
to a Rhythm Pattern — Real
Time Write (page 157)
NOTE
Pressing the VOLUME
buttons for Rhythm also
changes the volume of the
metronome.
ELS-01/01C Owner's Manual
9
147