Entering Percussion Sounds To A Rhythm Pattern - Real Time Write - Yamaha Electone Stagea ELS-01 Owner's Manual

Entering Percussion Sounds to a Rhythm Pattern —
Real Time Write
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
While you listen to the entered rhythm or metronome click, play the Upper/Lower
keyboards to enter the desired percussion sounds.
1
Select the desired part to which the percussion sounds are
entered, and the desired drum kit, by following Steps 1 – 3 on
page 150.
2
Set the appropriate Quantize value.
The positions at which the sounds are input will be corrected according to the
predetermined Quantize value in the Real Time Write operation. For details,
refer to page 156.
3
Press the rhythm [START] button in the panel.
The rhythm (or Metronome) starts playing, enabling the Real Time Write
operation.
4
While the rhythm is running, play the percussion sounds from
the Upper and/or Lower keyboards.
If you have started the Rhythm Pattern Program by copying a preset rhythm,
you can listen the selected rhythm as you play the sound. If you have started
from scratch, set the Metronome to "on" in the SETTING Page and listen to the
metronome click. The pattern will automatically repeat (or "loop") for a certain
number of measures as set in the SETTING Page.
5
Repeat steps 2 through 4 above to layer each instrument and
complete your own rhythm.
Reference Page
Metronome (page 147)
ELS-01/01C Owner's Manual
9
157