Yamaha Electone Stagea ELS-01 Owner's Manual page 125

3
Press the [COPY] button in the display to call up the Copy To
Display.
4
(If necessary) Change the destination.
For details on changing the destination, see page 103.
5
Press the [EXECUTE] button to execute the copy.
The song name in the destination is the same as the one of the source song. If
you copy a song to a folder that contains a song whose name is the same as the
source song, the copied song name will be "source song name_XXX" (XXX
indicates song number). If you want to change the song name, see page 108.
If you copy an XG-compatible song to another folder or media that contains a
song with the same name as the source song, a message appears prompting
confirmation of overwriting the song. Selecting [OVERWRITE] overwrites the
XG-compatible song in the destination.
To copy a song from USB flash memory to another:
It is recommended that you use connect both media (source and destination) to the
USB TO DEVICE terminal. However, if there are not enough terminals available, you
can copy a song by following the procedure below.
1
Follow the step 1 – 3 on page 124.
2
Press the
displayed.
3
Select "MEMORY" as the destination.
button several times until the Media List is
Never attempt to eject the
media or turn the power
off during copying (or
moving a protected song).
Data may be lost.
NOTE
If you copy a protected song
to the same folder as the
source song, the copied
song will be the protected
edit song.
Removing the media
during operation may
result in loss of the data.
Never attempt to remove
the media unless the
"Eject the source media"
message appears.
ELS-01/01C Owner's Manual
7
125