Installing And Assembling The Rack - Panasonic SC-HTR200 Operating Instructions Manual

Installing and assembling the rack

Installation
 At least two people should be available to assist with setup and installation to reduce the chances of
fingers getting caught and back strain.
 Use a Phillips-head screwdriver. (Do not use a powered screwdriver.)
 Choose a stable location for installation.
 Handle the glass doors with care.
• Place the rack on a flat, stable surface so there is no danger of it falling over. Take precautions if such a
surface is not available.
• You can install this unit so that it is flush with the wall at either the sides or back, but you will require some
space for working during setup and connection.
• Do not place in front of curtains as they may obstruct the unit's vents.
• Avoid pressing on the speaker nets during installation.
Caution
• Use the speakers only with the recommended system. Failure to do so can damage the amplifier and
speakers, and can cause fire.
• Consult a qualified service person if damage occurs or if performance worsens.
• Do not attach these speakers to walls or ceilings.
Note
Lift the television when placing it on the rack. Dragging it may damage the top panel.
For details, refer to the television's operating instructions.
10
RQTV0311
A
Shelf assembly
Setup example
This system
 This unit has built-in speakers.
• Do not connect other speakers. Using other
speakers may not produce the correct sound, and
furthermore can cause damage.
• You cannot add surround speakers to this
system.
B
Glass door assembly
Speaker net
This system
This system