Adjusting Audio Timing To Video Timing; Sleep Timer; Clear Audio At Low Volume; Switching The Attenuator - Panasonic SC-HTR200 Operating Instructions Manual

Functions and settings (cont.)
Adjusting audio
timing to video
timing
Adjust audio timing
to video timing
by delaying audio
output by 40 msec
or so when pictures
arrive after sounds.
Factory setting is "ON".
Refer to the setting on
the right if delaying
audio is not necessary.

Sleep timer

The SLEEP timer can
turn the unit off after
a set time. It does
not control any other
components.
Clear audio at low
volume
Dynamic range
compression for Dolby
Digital.
Set the dynamic range
(the difference between
the loudest and softest
sounds) compression for
Dolby Digital. Use this
function when you have
to turn the volume down,
such as late at night. It
compresses the dynamic
range so that you can still
hear dialogue and leave
the sound field unaffected.
Switching the
attenuator
Switch the attenuator
on when sounds
become distorted
and "OVERFLOW"
appears on display
during analogue
input source
playback.
 Only appears when audio adjustment can be made.
28
RQTV0311
1 Press and hold for about 2 seconds.
to select "TV DELAY".
2 Press
REAL C., BASS, TREBLE, SLEEP, HDMI, TV DELAY, DRCOMP,
 
ATTENUATOR, REMOTE, INPUT MODE, RESET, EXIT
to select "OFF".
3 Press
4 Press a few times to select
"EXIT".
• Return to previous menu/cancel.
1 Press and hold for about 2 seconds.
to select "SLEEP".
2 Press
REAL C., BASS, TREBLE, SLEEP, HDMI, TV DELAY, DRCOMP,
 
ATTENUATOR, REMOTE, INPUT MODE, RESET, EXIT
Press to select the time.
3
To check the setting:
Select "SLEEP" again in Step 2.
To change a setting:
Repeat the procedure from the beginning.
Press a few times to select
4
"EXIT".
• Return to previous menu/cancel.
Press and hold for about 2 seconds.
1
2 to select "DRCOMP".
Press
REAL C., BASS, TREBLE, SLEEP, HDMI, TV DELAY, DRCOMP,
 
ATTENUATOR, REMOTE, INPUT MODE, RESET, EXIT
3 Press to select setting.
OFF: Normal playback; STANDARD: The level recommended by
the producer of the software for household viewing; MAX: The
maximum allowable compression (recommended for night viewing)
4 Press a few times to select
"EXIT".
• Return to previous menu/cancel.
1
Press and hold for about 2 seconds.
Press to select
2
"ATTENUATOR".
REAL C., BASS, TREBLE, SLEEP, HDMI, TV DELAY, DRCOMP,
 
ATTENUATOR, REMOTE, INPUT MODE, RESET, EXIT
Press to select "ON".
3
Press a few times to select
4
"EXIT".
• Return to previous menu/cancel.
Press
confirm.
Select "EXIT" and
•
confirm to finish the
setup mode.
Press
confirm.
ON, OFF
Factory setting: ON
Press
confirm.
Press
Press
confirm.
• Select "EXIT" and
confirm to finish the
setup mode.
Press
confirm.
30, 60, 90, 120 Factory setting: OFF
"SLEEP" lights when the
timer is set.
Press
Press
Press
• Select "EXIT" and
confirm to finish the
setup mode.
Press
Factory setting: OFF
Press
Press
Press
• Select "EXIT" and
confirm to finish the
setup mode.
Press
Factory setting: OFF
ON, OFF
Press
Press
to
to
to
to
to
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.
to confirm.