When Placing The Main Unit In A Rack Or On A Table - Panasonic HTB688 Operating Instructions Manual

When placing the main unit in a rack or on a table

Additionally required accessories (commercially available)
≥Fall prevention cord ..................................................................................................................... k 2
≥Screw eyes (to attach the fall prevention cord)............................................................................. k 2

≥ Use commercially available screws that are capable of supporting over 24 kg.
≥ Use a cord that is capable of supporting over 24 kg (with a diameter of about 1.5 mm).
Attach the cord to the main unit.

A Cord
§
§ If the cord cannot be threaded through the holes, try bending the cord,
about 5 mm apart from the tip, at an angle of 45
Place the main unit in the desired position and attach each cord onto the
rack or table.
≥ Make sure that the slack of the cord is minimal.
≥ Do not lean the main unit against the TV or wall.
B Screw eye
≥ Attach at a position capable of supporting over 24 kg.
≥ Depending on the placement of the main unit, the screwing position of the screw eye may differ.
14
TQBJ2019

(as illustrated above).
o
