Panasonic SC-HTR200 Operating Instructions Manual page 21

Digital signals this unit can play
• Dolby Digital
• DTS
• PCM signal of CD or DVD (including PCM signal with sampling frequency up to 96 kHz.)
1
2
or
or
3
Start play on the other equipment
• "DIGITAL INPUT" icon lights up when input signal is digital, and a digital surround signal icon
lights to indicate the kind of signal being received ( page 23).
 You can cancel or change Dolby Virtual Speaker or SFC mode ( pages 22 and 23).
4
 After playback, reduce the volume level and turn off.
Audio channel display
• The number of audio channels in a digital input source, for example 5.1-channel, is displayed for a
moment after the signal is received. (This is not displayed if the number of channels is the same after
you change the input source.)
E.g.) 5.1-channel digital surround signal
Subwoofer
Surround channels
Front and center channels
To turn on the unit
Press the button.
To select the source
Press one of these buttons.
For combination DVD
recorder/VCR (equipment with
DVD/VCR output terminal)
• When playing DVD: select "AUX
1".
• When playing VCR: select "AUX
2".
Lights up when input signal is digital
DIGITAL INPUT
DIGITAL
Digital surround signal
VS
Adjust the volume
Press the buttons.
DIGITAL INPUT
DIGITAL
VS
TV
BD/DVD
AUX 1
AUX 2
 "AUX 1" and "AUX 2" switch every
time you press [AUX 1/2].
E.g.) Front channels only
DIGITAL INPUT
DIGITAL
VS
PL
"0" appears when there is
no signal from the center and
surround channels
(factory setting)
: TV
: Blu-ray Disc player/
DVD recorder
: AUX1 terminal
: AUX2 terminal
0 (Min) to 80 (Max)
21
RQTV0311