Panasonic SC-HTR200 Operating Instructions Manual page 8

Control guide (cont.)
Control panel
Standby/on switch
( pages 19 and 20)
Display
Sleep timer indicator ( page 28)
Amplifier
Audio input terminal
( pages 15 to 18)
Speaker terminals
The speakers are already connected. Do not touch the connections unless absolutely necessary.
If speaker cables become disconnected, refer to the illustrations below for connection.
Speaker cable connection
White
Red
Black
White (Blue line)
8
RQTV0311
Standby indicator
( page 19)
General display
HDMI terminal ( pages 14 and 24)
Digital input terminal
( pages 14, 15, 17, 18 and 24)
Grey
Yellow
Blue
Black
For adjusting volume ( page 20)
For using "GAME (SOUND)"
( page 26)
When input signal is fixed to PCM ( page 29)
SLEEP
PCM
kHz
Displayed together with the sampling frequency when
PCM input signal is more than 48 kHz
How to connect the speaker cables
When input signal is digital ( page 21)
DIGITAL INPUT
DIGITAL DTS
VS
SFC
PL 2CH MIX
Digital surround signal/Sound field ( page 23)
Speaker terminals
Note
Never short-circuit positive (+)
and negative (―) speaker wires.
Incorrect connection can damage
the speakers.
"SELECTOR" switch
( page 20)
AC inlet
( page 19)