Table of Contents
Advertisement
Anytime any maintenance or repairs are done (including clearing jams), FIRST:
1.
Disconnect the Nailer from the air hose.
2.
Attempt to fire the Nailer into a piece of scrap wood to ensure that it is discon-
nected and is incapable of firing any nails.
3.
Empty the Nail Cannister (82) completely.
1.
Occasionally a nail may become jammed in the firing mechanism of the Roofing
Nailer, making the tool inoperable.
2.
To remove a jammed nail, disconnect the Roofing Nailer from its compressed air
supply. Attempt to fire the Roofing Nailer into a piece of scrap wood to ensure it
is disconnected. Empty the Nail Cannister (82) completely of nails.
3.
Remove and discard all jammed/damaged nails from the nailer. Detach and
discard all damaged or improperly collated nails from the coil. Examine the nailer
for any broken, worn or damaged parts. If any part appears damaged or worn,
have the tool repaired by a qualified service technician.
4.
Replace the coil of nails into the Roofing Nailer. Close the Cannister Cover (89)
and Latch (64) securely. Then, reconnect the air supply hose to the tool.
5.
Test fire the nailer into an appropriate piece of scrap wood repeatedly to test for
proper operation. If the nailer does not function properly, have the tool serviced
by a qualified technician.
SKU 92359
For technical questions, please call 1-800-444-3353.
Clearing Jams
PAGE 11
Hide quick links:
Advertisement
Table of Contents
