Table of Contents
Advertisement
Trigger (47) once and one nail will fire. To fire another nail, pull the nose of the
nailer up off the workpiece, place the nose back down onto the next position on
the workpiece and briefly squeeze the trigger. Repeat this procedure to continue
firing nails. Do not fire nails on top of one another or into any foreign object.
Nails could bounce off, damaging the workpiece or causing PERSONAL INJURY.
3.
Do not press the Nose of the Roofing Nailer against the work surface with excess
force. Allow the tool to do the work. Always allow the tool to recoil off the work-
piece.
4.
Caution: While working on roofs, tar and dirt may build up on the Nose of the
Roofing Nailer. This can prevent normal operation. Remove buildup with a non-
flammable solvent. NEVER use gasoline or other flammable solvents. Do not
immerse the Roofing Nailer in an approved solvent beyond the height of the nail
heads, to avoid getting the solvent into the drive cylinder of the tool. Make sure to
dry off the Roofing Nailer before use. Any oil film left after cleanup will accelerate
tar buildup.
5.
When finished using the Roofing Nailer, always disconnect the tool from its com-
pressed air supply. Attempt to fire the Roofing Nailer into a piece of scrap wood
to ensure it is disconnected and is incapable of firing any nails. Empty the Nail
Cannister (82) completely of nails.
6.
Make sure to store the Roofing Nailer in its accessory Carrying Case and in a
clean, dry, safe location out of reach of children.
TRIGGER (47)
NOSE
SKU 92359
For technical questions, please call 1-800-444-3353.
ROOFING SHINGLE
AIR SUPPLY HOSE
(NOT INCLUDED)
PAGE 10
Hide quick links:
Advertisement
Table of Contents
