Table of Contents
Advertisement
Quick Links
MAGNESIUM COIL SIDING NAILER
ASSEMBLY AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
2005 by Harbor Freight Tools
©
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improve-
ments, actual product may differ slightly from the product described herein. Tools required for assembly
and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 10g
Model
93257
. All rights reserved. No portion of this manual or any artwork
®
Advertisement
Table of Contents
Related Manuals for Central Pneumatic 93257
Summary of Contents for Central Pneumatic 93257
- Page 1 Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. Copyright 2005 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork © ® contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
-
Page 2: Product Specifications
It will do the job better and more safely at the rate for which it was intended. Do not modify this tool, and do not use this tool for a purpose for which it was not intended. REV 05j REV 06k SKU 93257 For technical questions, please call 1-800-444-3353 PAGE 2... - Page 3 Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if the trigger does not operate properly. SKU 93257 For technical questions, please call 1-800-444-3353 PAGE 3...
- Page 4 Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. Do not operate tool if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgement or reflexes are impaired while taking drugs.
- Page 5 When unpacking, check to make sure that all accessories listed on page 13 are included, and the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
-
Page 6: Operation
Hoses, couplers, oilers, regulators, and filters are all available at Harbor Freight Tools. NOTE: If an automatic oiler is not used, for smoother operation and to extend the life-span of the tool, put 3-5 drops of pneumatic Tool Oil (93) in the attached Air Plug (82-not included) before each use. - Page 7 To open the Magazine Cover (91), press down on the Latch (57) and swing the Door (32) open. Then, swing the Magazine Cover open. (See Figure C.) MAGAZINE COVER (91) LATCH (57) FIGURE C DOOR (32) Rev 06k; REV 06l SKU 93257 For technical questions, please call 1-800-444-3353 PAGE 7...
-
Page 8: Operating The Nailer
70 to 125 PSI. Do not exceed the maximum 125 PSI. Rotate the Exhaust Cover (2) so that the exhaust air blast will be directed away from the operator. (See Figure E, next page.) Rev 06k; REV 06l SKU 93257 For technical questions, please call 1-800-444-3353 PAGE 8... - Page 9 Make sure to store the Nailer in a clean, dry, safe location out of reach of children. EXHAUST COVER FIGURE E TRIGGER (60) AIR PLUG (82-not included) MAGAZINE (85) SAFETY (38) REV 06l SKU 93257 For technical questions, please call 1-800-444-3353 PAGE 9...
-
Page 10: Clearing Jams
When finished working, disconnect the air supply. Remove the nails. Then, store the Nailer in a clean, dry, safe location out of reach of children. SKU 93257 For technical questions, please call 1-800-444-3353 PAGE 10... -
Page 11: Inspection, Maintenance, And Cleaning
Store the tool in a clean, dry, safe location out of reach of children. WARNING: All maintenance, service, or repairs not listed in this manual are only to be attempted by a qualified service technician. For technical questions, please call 1-800-444-3353 SKU 93257 PAGE 11... -
Page 12: Troubleshooting
THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. For technical questions, please call 1-800-444-3353 SKU 93257 PAGE 12... -
Page 13: Parts List
PARTS LIST REV 06l For technical questions, please call 1-800-444-3353 SKU 93257 PAGE 13... -
Page 14: Assembly Diagram
ASSEMBLY DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. REV 06l SKU 93257 For technical questions, please call 1-800-444-3353 PAGE 14... - Page 15 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.