Inspection, Maintenance, And Cleaning; Please Read The Following Carefully - Central Pneumatic 92359 Assembly And Operating Instructions Manual

Coil roofing nailer 11 gauge contractor series

Hide thumbs Also See for 92359:

Set up and operating instructions manual (19 pages)

Table Of Contents

Table of Contents

Anytime any maintenance or repairs are done, FIRST:

Disconnect the Nailer from the air hose.

Attempt to fire the Nailer into a piece of scrap wood to ensure that it is discon-

nected and is incapable of firing any nails.

Empty the Nail Cannister (82) completely.

Inspect the Nailer frequently and make sure that the tool is lubricated (manually

or by an automatic oiling system) before each use with Pneumatic tool oil.

Do not use detergent oil or additives as these lubricants will cause accelerated

wear to the internal seals.

Inspect the air supply filter, if present, before each use and clean or replace as

necessary.

Dirt and water in the air supply filter are major causes of pneumatic tool wear.

Use a filter/oiler for better performance and longer tool life. The filter must have

adequate flow capacity for the specific application.

Store the unit in a clean and dry location.

Periodically, check to make sure that all bolts on the Nailer are tight.

All maintenance, service, or repairs not listed in this manual are only to be

attempted by a qualified technician.

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY

DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR

DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE

OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED

TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR

EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY

CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL

RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR

REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT

PARTS THERETO.

SKU 92359

For technical questions, please call 1-800-444-3353.