Panasonic PV-GS400 Operating Instructions Manual page 57

PV-GS400Eng.book 57 ページ ２００４年６月４日 金曜日 午後３時１７分
≥The [PRINT] Indication does not appear when
the card is not inserted in the Camcorder. (You
cannot print pictures.)
≥When the [PRINT] Indication keeps blinking
(more than about 1 minute), the Camcorder and
the printer are not connected properly. Connect
the cable again or check the printer.
≥When the Camcorder and the printer are
connected in the Tape Recording/Playback
Mode, the [WEB ] or the [WEB
Indication may appear on the LCD Monitor.
However, images cannot be printed.
3
Select the desired picture.
≥Images cannot be printed when they are
displayed in Multi-Picture Mode.
4
When printing with date:
Set [PICTURE PLAYBACK MENU] >>
[PRINT] >> [DATE] >> [ON].
STILL
ENTER
(16)
FADE
MENU
≥You cannot set date printing when the printer
does not support it.
≥Proceed to the next step if you do not need
date printing.
5
Set [PICTURE PLAYBACK MENU] >>
[PRINT] >> [THIS PICTURE] >> a desired
paper size.
STILL
ENTER
(16)
FADE
MENU
≥You cannot set a paper size which is not
supported by the printer.
6
Press the [5] Button
(21) to select a desired number of prints.
STILL
ENTER
FADE
(21) (18)
≥You can set the number of prints up to 9.
7
Press the [ENTER] Button
STILL
(19)
ENTER
FADE
Editing Mode
If you want to stop printing halfway
Press the [∫] Button
≥Do not operate as follows during printing,
≥If the Camcorder is disabled while it is
]
(18) or [6] Button
(19)
.
(20) .
pictures cannot be printed properly.
≥Disconnecting the USB Cable
≥Removing the Card
≥Switching the operation mode
connected to the printer, connect the USB
connection cable again or check the printer.
57