Setting Colour System; Setting Sound System; Fine Tuning; Skip - Sanyo LCD-32K40TD Instruction Manual

Normally it is unnecessary to set colour system. However, if abnormal colour occurs, you may try to adjust
the colour system.
1
Navigate to ATV Manual Tuning submenu, press ▲ or ▼
button to highlight System-C item.
2
Press ◄ or ► button to select AUTO, PAL or SECAM until
the proper colour effect is reached.
3
Press RED button to save.
In case of abnormal sound, you may try to adjust the sound system.
1
Navigate to ATV Manual Tuning submenu, press ▲ or ▼
button to highlight System-S item.
2
Press ◄ or ► button to select DK, I or BG until the proper
sound effect is reached.
3
Press RED button to save.
Fine-Tune is not necessary under normal conditions. However, in area of inferior broadcast conditions
where adjustment is necessary for a better picture and sound effect, use Fine-Tune.
1
Navigate to ATV Manual Tuning submenu, press ▲ or ▼
button to highlight Fine-Tune item.
2
Press ◄ or ► button to fine tune until the best possible
picture and sound are obtained.
3
Press RED button to save.
Used to remove unwanted channels from the channel scanning memory.
1
Navigate to ATV Manual Tuning submenu, press ▲ or ▼
button to highlight Current CH item. Press ◄ or ► button
to select a channel positon in which you want to skip.
2
Press ▲ or ▼ button to select Skip item. Press ◄ or ►
button to select Yes.
3
Press RED button to save. The Channel set as SKIP
will not appear when pressing CHANNEL UP (▲) or
CHANNEL DOWN (▼) button.

SETTING COLOUR SYSTEM

SETTING SOUND SYSTEM

FINE TUNING

SKIP

TV SETTING
ATV Manual Tuning
Skip Yes
27