Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Sanyo LCD-32K40TD
Summary of Contents for Sanyo LCD-32K40TD
- Page 1 LCD-32K40TD INSTRUCTION MANUAL LCD-42K40TD LCD TV...
- Page 2 IMPORTANT INFORMATION If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: ● Using cabinets or stands recommended by the manufacturer of the television. ●...
-
Page 3: Safety Precaution
TO THE OWNER Before operating this LCD TV, read this manual thoroughly and operate the LCD TV properly. This LCD TV provides many convenient features and functions. Operating the LCD TV properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS Do not install the LCD TV near the ventilation duct All the safety and operating instructions should be of air-conditioning equipment. read before the product is operated. This LCD TV should be operated only from the Read all of the instructions given here and retain them for later use. -
Page 5: Table Of Contents
TABLE PREPARATION........7 SETTING COLOUR SYSTEM PART NAMES AND FUNCTIONS SETTING SOUND SYSTEM CONNECTING LCD TV......9 FINE TUNING C O N N E C T I N G A C P O W E R C O R D SKIP INSTALLING STAND PROGRAMME EDIT PREVENTING THE TV FROM CHANNEL RENAME... -
Page 6: Feature And Design
Ambient light sensor automatically adjusts picture brightness to provide more relaxing VIZON Engine view for your eyes. (see pages 16 and 36) VIZON Engine, SANYO High Quality Image Processing Technology reproduces clear, Favorite List dynamic, natural and realistic picture along Your favorite channel list can be made. -
Page 7: Preparation
PREPARATION PART NAMES AND FUNCTIONS FRONT Panel Side Control Indicator INDICATORS Power Indicator ON Timer Indicator Infrared Remote Receiver ECO Sensor CARE FOR USING LCD TV ● Do not bump or scratch the panel surface as this causes flaws on the surface of the screen. ●... -
Page 8: Side Control
PREPARATION (Each button on the control panel has the same function with its SIDE CONTROL counterpart on the remote control. ) CHANNEL UP/DOWN (▲▼) buttons - Used to Change channels. - Used to select items. VOLUME (+/-) buttons - Used to adjust the volume. - Used to adjust the value of the selected item on On-Screen Menu. -
Page 9: Connecting Lcd Tv
CONNECTING LCD TV CONNECTING AC POWER CORD This LCD TV uses nominal input voltages of 110-242V AC. This LCD TV automatically selects the correct input voltage. It is designed to work with single-phase power systems. To reduce risk of electric shock, do not plug into any other type of power system. -
Page 10: Connecting Outdoor Aerial
AUDIO PC IN HDMI 1 (DVI) CONNECTING LCD TV HDMI 2 HDMI 3 CONNECTING OUTDOOR AERIAL Cable used for connection (This cable Outdoor Aerial is not supplied with this LCD TV.) AV1 IN Aerial Cable · S-VIDEO NOTE: For all aerial circuit problems, please consult your local dealer. -
Page 11: Connecting Video Equipment
CONNECTING LCD TV CONNECTING VIDEO EQUIPMENT Cables used for connection (These cables are not supplied with this LCD TV.) · Video Cable(RCA X1), S-Video Cable, Audio Cable (RCA X2) : Video 1 or Video 2 · Video Cable(RCA X3), Audio Cable (RCA X2) : DVD (Component Video) ·... -
Page 12: Before Operation
BEFORE OPERATION OPERATION OF REMOTE CONTROL INPUT button POWER ON/OFF button MUTE button INFO button SPORTS button ∇ A·B button STILL button ECO button 0-9 NUMBER buttons SLEEP TIMER button MENU button BACK button CHANNEL RECALL button POINT ▲/▼/◄/► buttons OK button VOLUME ( - ) button CHANNEL UP (▲) button VOLUME ( + ) button... -
Page 13: Operation Range
BEFORE OPERATION OPERATION RANGE Point Remote Control toward LCD TV (Infrared Remote Receiver) whenever pressing the buttons. Maximum operating range for Remote Control is about 16.4’ (5m) in front, about 30° to the left or the right, about 15° for up or down. Infrared Remote Receiver REMOTE CONTROL BATTERIES INSTALLATION Remove the battery com-... -
Page 14: Main Menu Overview
BEFORE OPERATION MAIN MENU OVERVIEW ● List of main menus to help you with operations PICTURE MENU SOUND MENU TV SETTING MENU TIME MENU TV SETTING Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit BACK MENU LOCK MENU SETUP MENU ●... -
Page 15: Basic Operation
BASIC OPERATION TURNING ON / OFF LCD TV Complete the peripheral connections before turning on LCD TV. (Please refer to "CONNECTING LCD TV".) Connect LCD TV's AC Power Cord into an AC outlet. Press POWER ON/OFF button on Side Control of LCD TV or on Remote Control to turn it ON. The POWER indicator will light up (blue). -
Page 16: Mute
BASIC OPERATION MUTE Should you wish to mute the sound, press MUTE button. To switch the sound back on, press MUTE button again or press VOLUME(+/-) buttons on Side Control or on Remote Control. ECO mode is environmentally friendly mode by adjusting the screen-end power TV unit to reduce power consumption. -
Page 17: Picture Mode
BASIC OPERATION PICTURE MODE Select image level by pressing PICTURE MODE button on Remote Control. PICTURE button Personal User presets picture adjustment in PICTURE MODE. Standard Natural and splendid picture level preset on this LCD TV. Vivid Natural brightness and vivid colour. Dynamic Bright and dynamic picture. -
Page 18: Channel And Programme Selection
BASIC OPERATION CHANNEL AND PROGRAMME SELECTION Please note: your new LCD TV is capable of receiving both radio and TV broadcasts. And for TV reception, your new LCD TV is capable of receiving both traditional analogue channels and digital channel. When watching digital TV programme and you want to listen to radio programme, simply press TV/Radio button to switch. -
Page 19: Wide
BASIC OPERATION WIDE Select screen size among "16:9", "4:3", "Auto", "Zoom1" and 16:9 "Zoom 2" by pressing WIDE button on Remote Control. Note: ● "Auto" can only be selected in DTV mode. ● When selecting Zoom1/ Zoom2, you may use ▲ or ▼ button to move the picture upward, downward, or press ◄ or ►... -
Page 20: Subtitle
BASIC OPERATION SUBTITLE In DTV mode, press SUBTITLE button to display the menu like Picture 1. Press ▲ or ▼ button to select English, then press OK button to confirm. In ATV and AV mode, if the played program has subtitle content, press SUBTITLE button to display "TTX Subtitle On", press it again to display "TTX Subtitle Off". - Page 21 BASIC OPERATION Formula 1 ING Australian Grand Prix Formula 1 ING Australian Grand Prix To set Reserve Press EPG button to display the OSD as Picture 1, press ▲, ▼, ◄ or ► button to select one programme, then press BLUE button to enter into Reserve menu as Picture 2. In the Reserve menu, press ▲, ▼, ◄ or ► button to set Programme, Hour, Minute, Mode, Date, Month and Week.
-
Page 22: T E L E T E X
TELETEXT OPERATION OF REMOTE CONTROL POWER ON/OFF button TEXT REVEAL button TEXT HOLD button TEXT CANCEL button NUMERIC buttons TEXT INDEX button TEXT SUBCODE button TEXT SIZE button SUB PAGE DOWN (◄) button SUB PAGE UP (►) button VOLUME ( ) button PAGE UP (▲) button PAGE DOWN (▼) button... -
Page 23: Text/ Tv
TELETEXT TELETEXT Your system receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather and sports information, stock exchange prices and programme previews are among the many services available. TEXT/ TV Press TXT/TV button to select teletext. The display on the screen will flow like below when repeatedly press TXT/TV button. -
Page 24: Text Subcode
TELETEXT TEXT SUBCODE Press the TEXT SUBCODE button, “110/..” will be displayed (e.g. the current page is 110). Press the NUMERIC buttons(0-9) to enter the sub page. For example, to select sub page 4, press NUMERIC buttons 0-0-0-4, and "110/0004" will be displayed. TEXT SIZE Press TEXT SIZE button to enlarge the top half of the text page. -
Page 25: Tv Setting
TV SETTING Auto Channel Search is performed automatically when TV is first powered on or after resetting. Note: Be sure to select the proper input source (ATV/DTV) before tuning operation. AUTO TUNING You should perform an auto channel search to search for all channels available and store them in memory. Press MENU button and the main menu screen will be displayed. -
Page 26: Dtv Manual Tuning
TV SETTING DTV MANUAL TUNING In TV SETTING menu, Press ▲ or ▼ button to select DTV Manual Tuning, then press ► or OK button to access. Press ◄ or ► button to select your desired channel. Press OK button to begin the manual DTV channel search. When search is finished, the total of programmes will be shown as Picture 3. -
Page 27: Setting Colour System
TV SETTING SETTING COLOUR SYSTEM Normally it is unnecessary to set colour system. However, if abnormal colour occurs, you may try to adjust the colour system. Navigate to ATV Manual Tuning submenu, press ▲ or ▼ button to highlight System-C item. Press ◄ or ► button to select AUTO, PAL or SECAM until the proper colour effect is reached. -
Page 28: Programme Edit
TV SETTING PROGRAMME EDIT Programme Edit is used to Favourite programme edit, channel skip/delete/move/rename setup. Note: ● Channel move/rename is only useful in ATV mode. ● If the Programme Edit menu has more than one page, you may press ▲ or ▼ button to scroll the page upward or downward. -
Page 29: Setting Favourite Channel
TV SETTING SETTING FAVOURITE CHANNEL Navigate to Programme Edit submenu, press ▲ or ▼ button to select your favourite programme. Press FAV-LIST button to set favourite programme, the Channel will be marked, shown as Picture 1. Press BACK button to return to previous menu. Press MENU button or no operation for a few seconds (the Picture 1 duration can be set) to exit the menu screen directly. -
Page 30: Move Channel
TV SETTING MOVE CHANNEL Navigate to Programme Edit submenu, press ▲ or ▼ button to select ATV Channel desired to move. Press YELLOW button, the Channel will be marked as MOVE, shown as right Picture. Then press ▲ or ▼ button to move the channel upward or downward to a desired new position. -
Page 31: P I C T U R E M E N
PICTURE MENU PICTURE Press MENU button and the main menu screen displays. Press ◄ or ► button to select PICTURE menu, Press ▼ button to access the menu. Within the menu, press ▲ or ▼ to scroll through the page upward or downward, and press ▲, ▼, ◄ or ► to navigate through the options or adjust an option. -
Page 32: S O U N D M E N
SOUND MENU SOUND Press MENU button and the main menu screen displays. Press ◄ or ► button to select SOUND menu, Press ▼ button to access the menu. Within the menu, press ▲ or ▼ to scroll through the page upward or downward, and press ▲, ▼, ◄ or ► to navigate through the options or adjust an option. -
Page 33: T I M E M E N
TIME MENU TIME ZONE (Only DTV) To obtain local time, you should first set local time zone, and it depends on your local station wheth- er it has broadcast time zone information. Press MENU button and the main menu screen displays. Press ◄ or ► button to select TIME menu, Press ▼ button to access the menu. -
Page 34: On Timer Setup
TIME MENU ON TIMER SETUP With On Timer has been set, the LCD TV will automatically turn on at the preset time. Navigate to the Time menu, press ▼ button to access. Press ▲ or ▼ button to select On Timer item, press ► or OK button to access the submenu. Now the Active item will be highlighted automatically, shown as right picture. -
Page 35: Sleep Timer Setup
TIME MENU SLEEP TIMER SETUP Sleep timer lets you select the amount of time before your LCD TV turns itself off automatically. Navigate to the Time menu, press ▼ button to access. Press ▲ or ▼ button to select Sleep Timer item, shown as Picture 1. Press ◄ or ► button to select the amount of the time, if you want to turn off the timer, please select Off. -
Page 36: Setup Menu
SETUP MENU SYSTEM SETUP You may change system settings such as S/P DIF, Audio Preference, etc. by making use of Setup menu. Press MENU button and the main men screen displays. Press ◄ or ► button to select Setup menu, Press ▼ button to access the menu. Within the menu, press ▲ or ▼ to scroll through the page upward or downward, and press ▲, ▼, ◄ or ► button to navigate through the options or adjust an option. -
Page 37: Auto Update
SETUP MENU AUTO UPDATE Within SETUP menu, press ▲ or ▼ to scroll through the page upward or downward until you select Auto Update, shown as Picture 1. Then press ◄ or ► button to select On or OFF. On: To allow system update automatically. Off: To turn off Auto Update function. Note: ●... -
Page 38: Manual Update
SETUP MENU MANUAL UPDATE Within SETUP menu, press ▲ or ▼ to scroll through the page upward or downward until you select the Manual Update. Press ► button or OK button to display Picture 1. Press ◄ or ► button to select Yes, the system will enter the following steps automatically: Step 1: Searching for update of software, shown as picture 2. -
Page 39: L O C K M E N
LOCK MENU LOCK SYSTEM Press MENU button and the main menu screen displays. Press ◄ or ► button to select LOCK menu, Press ▼ button to select Lock System,and Password is required, shown as Picture 1. Picture 1 When the 4 character Password is entered, the Menu will be displayed as Picture 2. Press ◄ or ► button to select On or Off. -
Page 40: Block Programme
LOCK MENU BLOCK PROGRAMME The Block Programme function blocks any channels that you do not want to watch or that you do not want your children to watch. Navigate to the LOCK menu and input the correct password to access. Press ▲... -
Page 41: Screen Setup For Pc Menu
SCREEN SETUP FOR PC MODE PC SETUP Before adjusting the screen, make sure that you select the correct source (PC). Press MENU button and the main men screen displays. Press ◄ or ► button to select Picture menu, Press ▼ button to access the menu. Within the menu, press ▲ or ▼ to scroll through the page upward or downward until you select PC Setup, then press ► or OK button to access. -
Page 42: Dealer Mode
DEALER MODE DEALER MODE TO DISPLAY DEALER MODE: Press and hold Menu button on Side Control, and then press INFO button on remote control to display Dealer mode menu. The Dealer Mode has 11 different modes: VOLUME LOCK, TUNING LOCK, START MODE, OSD, RC, AC POWER, MUSIC STANDBY MODE, NO SIGNAL OFF, PC CONTROL, BAUD RATE and RESET. - Page 43 STANDBY DEALER MODE 9600bps Option Description Use this feature to set Music Mode MUSIC MODE SETUP c o n d i t i o n i n 5 a n a l o g u e c h a n n e l positons.
-
Page 44: Appendix
APPENDIX CLEANING LCD TV Be sure to disconnect the AC Power cord from AC outlet before cleaning the LCD TV. Clean your LCD TV as follows: ● Gently wipe the screen and cabinet with dry soft cloth. ● The screen is likely to be damaged if it is not maintained properly. Do not use hard objects like a hard cloth or paper. -
Page 45: Troubleshooting
APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected LCD TV to your equipment as described in the section "CONNECTING LCD TV". 2. Check cable connection. Verify that all external equipment and power cords are properly connected. 3. -
Page 46: Technical Specifications
APPENDIX TECHNICAL SPECIFICATIONS Model LCD-32K40TD/ LCD-42K40TD Maximum Visible Range LCD-32K40TD: 80cm ; LCD-42K40TD: 106cm (Screen Diagonal Size) Picture Resolution LCD-32K40TD: 1366(H) x 768(V) ; LCD-42K40TD: 1920(H) x 1080(V) Voltage AC110-242V 50/60Hz Power Consumption LCD-32K40TD: 99W ; LCD-42K40TD: 174W Power Management... - Page 47 APPENDIX Operating Temperature 0ºC~40ºC（32ºF~104ºF） Operating Humidity 20~80% Storage Temperature -10ºC~50ºC（14ºF~122ºF） Storage Humidity 20~80% ■ Specifications are subject to change without notice. ■ The On-Screen Menu and figures in this manual may differ slightly from the product.
-
Page 48: Configuration Of Vga Terminal
APPENDIX CONFIGURATIONS OF VGA TERMINALS VGA IN (D-SUB) TERMINAL Terminal : D-SUB15 PIN Connect video output terminal of LCD TV to this terminal with VGA Cable (not supplied). When connecting Macintosh computer, the MAC Adapter (not supplied) is required. Red Input No Connect Pin Configuration Green Input... - Page 49 APPENDIX When input signal is digital from DVD terminal, refer to the chart below. When input signal is digital from HDMI terminal, refer to the chart below. Frame Resolution Frequency EIA1920×1080i@60 33.750 60.00H 67.500 60.00H EIA1920×1080p@60 28.125 50.00H EIA1920×1080i@50 EIA1920×1080p@50 56.250 50.00H EIA1280×720p@60...
-
Page 50: Uninstalling Stand Base
APPENDIX UNINSTALLING STAND BASE CAUTION IN UNINSTALLING STAND BASE ● Through in uninstalling work, handling with more than two people is recommended. ● When holding (moving or lifting) the LCD Display, hold the display's body. Do not handle the LCD TV by holding the attached accessory parts (speakers), otherwise it may result in damage. - Page 51 APPENDIX Uninstalling Stand Base Note: For model LCD-42K40TD, release screw in 6 holes with screw driver. Pull the stand base out from the cabinet after all screws already removed. Uninstalling the stand base is completed now.
- Page 52 SANYO Electric Co., Ltd. Part No:1AA6P1P5864-A N6WEA ( UE5-B ) Printed in Indonesia...