Side Control - Sanyo LCD-32K40TD Instruction Manual

PREPARATION

SIDE CONTROL

SIDE TERMINAL
S/PDIF digital audio out Terminal
Connect the digital audio input
of a digital audio component.
AV2 Input Terminals
C o n n e c t v i d e o a n d a u d i o
outputs from video equipment.
DVD /Y t e rmin a l is a lso f o r
composite video input.
● DVD component (RCA type)
● Audio L and R (RCA type)
RS232 Interface
F o r s e r v i c e u s e . T h e u s e r
cannot operate the unit through
this terminal.
Aerial Jack
Connect the cable with a plug
from aerial jack to the aerial
socket on the cabinet back.
8
(Each button on the control panel has the same function with its
counterpart on the remote control. )
POWER ON/ OFF button
- Used to turn the LCD
TV on or off.
CHANNEL UP/DOWN (▲▼) buttons
- Used to Change channels.
- Used to select items.
VOLUME (+/-) buttons
- Used to adjust the volume.
- Used to adjust the value of the selected item on
On-Screen Menu.
- Used to execute the selected item on
On-Screen Menu.
OK
INPUT MODE button
- Used to select input source: TV/AV1/(S-VIDEO)/
AV2(DVD)/HDMI 1(DVI)/HDMI 2/HDMI 3/PC.
- Used to confirm the selected item on On-Screen
Menu.
MENU button
- Open or close the On-Screen Menu.
Headphone Jack
Connect a headphone (stereo)
to this jack.
When this jack is inserted,
speaker should be muted.
AV1 Input Terminals
Connect video and audio outputs
from video equipmenut.
● Composite Video (RCA type)
● Audio L and R (RCA type)
● S-Video (mini DIN 4 type)
Monitor Output Terminals
Connect a television, video
recorder or external audio
amplifier to these jacks.
● Video (RCA type)
● Audio L and R (RCA type)
PC Input Terminals
Connect computer outputs
to these terminals.
● RGB (D-SUB)
● Audio (L/R)
HDMI Input Terminals
Connect all kinds of HDMI output
equipment to these terminals.
● HDMI 1(DVI)
● HDMI 2
● HDMI 3