On Timer Setup - Sanyo LCD-32K40TD Instruction Manual

TIME MENU
With On Timer has been set, the LCD TV will automatically turn on at
the preset time.
1
Navigate to the Time menu, press ▼ button to access.
2
Press ▲ or ▼ button to select On Timer item, press ► or OK
button to access the submenu.
3
Now the Active item will be highlighted automatically, shown
as right picture. Press ◄ or ► button to select Off, Once,
Everyday, Mon-Fri, Mon-Sat, Sat-Sun or Sun.
4
Press ▲ or ▼ button to select Hour or Minute item, press ◄
or ► button to adjust the value.
5
After setting On Timer, you can press ▲, ▼, ◄ or ► button
to navigate through the following three options and adjust the
options.
Option
Volume
Mode
Program
6
When finished, use ▲ or ▼ button to select Close and press OK button to confirm the setting.
Press POWER ON/OFF button to swith the LCD TV to standby mode. At the preset time, the LCD TV
7
will automatically turn on and broadcast the preset program at the preset volume.
Note:
● While AC Power off, the setting will be removed, except for DTV mode.
● While On Timer is set, the Timer indicator will be light in Stand-by status.
● On Timer setting will be removed while AC Power off.
● If Off Timer and On Timer are set as the same time, the Off Timer setting is availabe while the LCD TV is
On, and On Timer setting is available when the LCD TV is off.
● After On Timer is executed, if no operation in 2 hours, the LCD TV will be off automatically.
34

ON TIMER SETUP

Description
Sets desired voume for the On programme.
Selects one source to be viewed through On timer.
Selects a broadcasting program for On timer.