Tv Setting; Auto Tuning - Sanyo LCD-32K40TD Instruction Manual

Auto Channel Search is performed automatically when TV is first powered on or after resetting.
Note: Be sure to select the proper input source (ATV/DTV) before tuning operation.
You should perform an auto channel search to search for all channels available and store them in memory.
1
Press MENU button and the main menu screen will be
displayed.
2
Press ◄ or ► button to select TV SETTING menu. Press
▼ button to access the menu. Auto Tuning item will be
highlighted, and press ► or OK button to access.
3
Now a confirmation box appears on the screen as Picture
1. Press ◄ or ► button to select Yes, and then press OK
button to start Auto Tuning. ATV search firstly, then DTV
and Radio, shown as Picture 2.
4
During tuning, press Back button to skip the current tuning
and start another one. Or press MENU button to exit the
tuning. As Pictures 3 and 4 shown, you can press ◄ or ►
button to select Yes and then press OK button to access
the operation.
5
After Auto Tuning, the LCD TV will memorize all ATV/DTV
channels available. The Saving display will be shown on
the screen like Picture 5 for 5 seconds. And then the first
position in the programme list will be on.
Note:
● At the first power on and just after plug and play channel
set-up, operating mode selection menu will appear, shown
as picture 6. Press ◄ or ► button to select and press OK
button for Standard/Energy Save or Store/Dynamic.
Then the pop up menu disappears.
● Recommending Standard/Energy Save mode for normal
home viewing.
● The password for Block Programme will be cleared after

auto tuning.

AUTO TUNING

TV SETTING

Picture 1
Picture 2
Picture 3
Picture 4
Picture 5
Picture 6
25