P I C T U R E M E N - Sanyo LCD-32K40TD Instruction Manual

1
Press MENU button and the main menu screen displays.
2
Press ◄ or ► button to select PICTURE menu, Press ▼ button to access the menu.
3
Within the menu, press ▲ or ▼ to scroll through the page upward or downward, and press ▲,
▼, ◄ or ► to navigate through the options or adjust an option.
4
Press BACK button to return to previous menu. Press MENU button or no operation for a few
seconds (the duration can be set) to exit the menu screen directly.
Option
Picture Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Temp
Red
Green
Blue
Wide Mode
Noise Reduction
Dynamic AI
Dynamic Contrast
Note:
● "Contrast", "Brightness", "Colour", "Sharpness", "Tint" are adjustable in Picture Mode "Personal" only.
● "Tint" only active in NTSC/NTSC4.43 Colour System.
● "Red", "Green", "Blue" are adjustable in Colour Temp "Personal" only.
PICTURE
Description
To select a desired picture mode. You can select Personal, Standard,
Vivid, Dynamic and Soft. The details, please refer to page 17.
To adjust image contrast.
To adjust screen brightness for easier viewing of dark picture such as
night scenes and black hair.
To adjust colour saturation.
To adjust image sharpness and display a sharp image.
To adjust tint for image.
To select one of four automatic colour adjustments. You can select
Normal, Warm, Cold or Personal.
To adjust red tone.
To adjust green tone.
To adjust blue tone.
To select the wide mode (display proportions) according to your video
signal type or personal preference. You can select 16 : 9, 4 : 3, Auto,
Zoom 1 or Zoom 2. The details, please refer to page 17.
Note: Auto can only be selected in DTV mode.
To reduce noise in the picture. You can select Low, Normal, High, Auto
or Off.
To adjust contrast and colour parameters until the display looks good.
You can select On or Off to turn on or turn off this function.
To improve picture contrast. You can select On or Off to turn on or turn
off this function.
PICTURE MENU
31