Channel And Programme Selection - Sanyo LCD-32K40TD Instruction Manual

BASIC OPERATION

CHANNEL AND PROGRAMME SELECTION

Please note: your new LCD TV is capable of receiving both radio and TV broadcasts. And for TV
reception, your new LCD TV is capable of receiving both traditional analogue channels and digital
channel.
When watching digital TV programme and you want to listen to radio programme, simply press
TV/Radio button to switch. To return to TV programme, press TV/Radio button again. (When watch-
ing analogue TV programme, TV/Radio button does not work.)
The TV allows channel and programme selection in the following ways:
Method 1 Using CHANNEL UP (▲) or CHANNEL DOWN (▼) button
Press CHANNEL UP (▲) or CHANNEL DOWN ( ▼ ) button to cycle among all available channels. The
skipped channels can not be selected by CHANNEL UP (▲) or CHANNEL DOWM ( ▼ ) button.
Note:
● By using CHANNEL UP (▲) or CHANNEL DOWN (▼) button, you can not select analogue channels in
DTV mode, or digital channels in ATV mode.
Method 2
Press CHANNEL RECALL button to switch to the previous channel.
Press CHANNEL RECALL button again to switch back to the current channel.
Press 0-9 NUMBER buttons to input a channel number, then wait for a few seconds or press OK button to
go directly to that channel.
Note:
● By using 0-9 NUMBER buttons, you can not select analogue channels in DTV mode, or digital channels
in ATV mode.
● When in Radio mode, you can press TV/Radio button to switch to TV mode.
● If you input one-digit or two-digit channel number, you can press OK button to go directly to the channel
without waiting.
Press LIST button to display the channel list. Use ▲ or ▼ button
to select a desired channel and then press OK button.
No operation for a moment (the duration can be set) or press
BACK button to exit menu operation.
Note:
● If the channel list has more than one pages, you may press
CHANNEL UP (▲) or CHANNEL DOWN ( ▼ ) button to scroll
the page upward or downward.
● Heart mark ( ) indicates the programme has been set as
favourite programme.
Method 5
After you have created the favourite channel list, you can press
FAV-LIST button to display the favourite channel list. Use ▲ or
▼ button to select a channel and then press OK button.
No operation for a moment (the duration can be set) or press
BACK button to exit menu operation.
Note:
● You can directly press FAV ▲ / FAV ▼ button to cycle among
the favourite channels.
18
Using CHANNEL RECALL button
Method 3 Using 0-9 and OK buttons
Method 4 Using channel list
Using favourite channel list