Mute; Eco; Surround; Volume Control - Sanyo LCD-32K40TD Instruction Manual

BASIC OPERATION
Should you wish to mute the sound, press MUTE button. To switch the sound back on, press MUTE
button again or press VOLUME(+/-) buttons on Side Control or on Remote Control.
ECO mode is environmentally friendly mode by adjusting the screen-end power TV unit to reduce power
consumption. Press ECO button on Remote Control to set "ECO Off", "ECO On" or "ECO Sensor". And it
will attain the best power consumption when "ECO On" is selected.
Press SURROUND button on Remote Control to set "Surround Off" or "Surround On".
To adjust the volume value desired by pressing VOLUME(+/-) buttons on Remote Control or on Side
Control. The volume dialogue box will appear on the screen for a short while.
VOLUME(+) button to increase volume, and VOLUME(-) button to decrease volume.
Select sound level by pressing SOUND MODE button on Remote Control.
Standard Normal sound state preset on LCD TV.
Select this mode for music programme.
Music
Select this mode for film programme.
Theater
Select this mode for talk programme.
News
Select this mode for user to call out the preset
Personal
sound adjustment in SOUND menu.
Press SLEEP TIMER button repeatedly to select "Off", "10min", "20min",
"30min", "60min", "90min", 120min", "180min" or "240min", shown as
Picture 1.
Once SLEEP TIMER has been set, TIMER indicator is light,and the timer
will display on the screen to start countdown for 1 minute, shown as
Picture 2. And the LCDTV will shift to Stand by status.
Press STILL button to switch the still function On or Off.
To cancel "Still" function:
Press STILL/ INPUT/ BACK/ POWER/ CHANNEL UP or DOWN button to
cancel the function.
Note:
● When the still function is On, the picture freezes. However, the
sound is not affected.
● If source disconnected ,it will display "No Signal".
● It is released automatically for no operation in 3 minutes.
16

MUTE

ECO

SURROUND

VOLUME CONTROL

SOUND MODE

SLEEP TIMER

STILL

Sleep Timer : Off
Picture 1
Picture 2
STILL : On