Receiving Faxes; Using Tel/Fax Mode - Sharp UX-BD80 Operation Manual

6. Receiving Faxes

Using TEL/FAX Mode

To select TEL/FAX mode, press
the display.
RESOLUTION/
RECEPTION
When the reception mode is set to TEL/FAX, the machine automatically
answers all calls on one ring (the number of rings can be changed as
explained on page 127). After answering, the machine monitors the line for
about five seconds to see if a fax tone is being sent.
♦
If the machine detects a fax tone (this means that the call is an
automatically dialled fax), it will automatically begin reception of the
incoming document.
♦
If the machine doesn't detect a fax tone (this means that the call is a voice
call or manually dialled fax), it will make a light ringing sound (called pseudo
ringing) for 15 seconds to alert you to answer (the duration of pseudo
ringing can be changed as explained on the following page). If you don't
answer within this time, the machine will send a fax tone to the other
machine to allow the calling party to send a fax manually if they desire.
RESOLUTION/
RECEPTION
until both TEL and FAX appear in
01-JAN 12:00
TEL FAX
125