Sharp UX-BD80 Operation Manual page 118

Sending a Fax by Automatic Dialling
Using an auto-dial number to send a fax
Follow the steps below to use an auto-dial number to send a fax.
♦
To use an auto-dial number to send an SMS message, see page 76.
♦
To use an auto-dial number to make a phone call using the cordless
handset, see page 50. To use an auto-dial number to make a phone call
using the speakerphone, see page 120.
1
Load the document(s).
•
If desired, press
resolution and/or contrast.
2
Press (or
display (if no name was stored, the number will appear).
START/
3
Press MEMORY
•
Important: Remove the document as soon as it exits the machine.
Otherwise, ink from received faxes and copies may soil the document.
•
If the transmission is completed successfully, the machine will beep once.
•
If an error occurs, the machine will beep three times and print a Transaction
Report to inform you of the problem (see page 146).
116
RESOLUTION/
RECEPTION
to set the
) until the name of the other party appears in the
. Dialling and transmission begin.
29-MAY 12:00
READY TO SEND