Table of Contents
Advertisement
Remote Operations
Toll Saver
When you call the machine to listen to your messages, it will answer after two
rings if it has received at least one message, or after four rings if it has not
received any messages.
This allows you to save money on telephone charges, particularly if you are
calling long distance. If the machine does not answer after two rings, you can
simply hang up before it answers, saving yourself the cost of that call.
If you do not want to use the Toll Saver function, you can turn it off by following
the steps below. In this case, the machine will answer after the number of
rings set with the NUMBER OF RINGS setting (see Changing the number of
rings on page 127).
1
Press
2
Press
once.
3
Press
once.
4
Press
function, or
5
Press
98
once and
once.
to turn on the Toll Saver
to turn it off.
to return to the date and time display.
Display:
A.M. SETTING
TOLL SAVER
TOLL SAVER
1=YES, 2=NO
The display briefly shows
your selection, then:
RECORDING TIME
Advertisement
Table of Contents
