Sharp UX-BD80 Operation Manual page 29

15
Press the number keys to enter the number of the straightest line.
Example:
•
If you make a mistake, press
START/
16
Press MEMORY
•
This completes the alignment procedure.
Note: If at any time the display shows the
alternating messages at right, check the printing
paper. If the tray is empty, add paper. If there is
paper in the tray, take it out and then reinsert it.
When you are finished, press
Quality mode (using more/less ink)
If you prefer a higher quality image when printing faxes and copies, turn on
Quality mode. If you wish to use less ink or speed up ink drying time, turn off
Quality mode.
♦
Quality mode is initially turned off.
1
Press once and
2
Press once and
3
Press once.
.
START/
MEMORY
3 times.
twice.
Installing the Print Cartridge
and then repeat the entry.
29-MAY 12:00
ADD PAPER &
29-MAY 12:00
.
PRESS START KEY
Display:
PRINT SET-UP
QUALITY MODE
QUALITY MODE
1=ON, 2=OFF
27