Table of Contents
Advertisement
Storing and Using Auto-Dial Numbers
8
Return to Step 2 to store another number, or press
exit.
Dialling an auto-dial number
Note: If you are on a Flash-type PBX and are dialing out, press
performing the procedure below.
1
Press
2
Press
appears in the display.
•
To go directly to names that begin with a certain letter, hold down the
number key with that letter until the letter appears in the display, and then
press
•
To check the number of a name in the display, press
•
If you wish to dial an auto-dial number that is stored in the machine, press
until BASE appears in the display, press
until the desired number appears. Note that auto dial numbers in the
machine that begin with an "R" (to dial out from a flash-type PBX) will not
appear.
3
Press
•
The number is automatically dialed.
50
once.
or
until the auto-dial number that you wish to dial
until the desired name appears.
.
repeatedly to
before
.
, and then press
or
Advertisement
Table of Contents
