Selecting A Special Mode - Sharp MX-5000N Quick Start Manual

SELECTING A SPECIAL MODE

The procedure for selecting a special mode for the scanner function is explained below.
The settings that must be selected vary for each special mode, however, the general procedure is the same. The
procedure for selecting "Whitening faint colours in the image (Suppress Background)" is explained here as an example.
The side to be scanned must be face up!
Scan Internet Fax Fax
Address Book
Original Scan: Auto
Address Entry
Exposure Auto
Send Settings
Resolution 200X200dpi
Address Review
File Format PDF
File
Colour Mode Auto/Greyscale
Quick File
Special Modes
(1)
Preview
Scan/Special Modes
Program Erase
Timer Suppress
Background
(2)
Job
Mixed Size
Build Original
Original
File
Count
This function may not apply if
sent by Black & White [Start].
(Mono2 selection)
Scan/Special Modes
Suppress Background
Light areas of the original may be suppressed as background.
1
(4)
92
1
2
USB Mem. Scan PC Scan
A4 Send: Auto
PDF
Mono2
OK
Dual Page
Scan
1
Card Shot
2
Slow Scan
Mode
Quick File
OK
(3)
OK
(5)
Cancel OK
3
3
Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
Select settings in the touch panel.
(1) Touch the [Special Modes] key.
(2) Touch the [Suppress Background] key.
(3) Read the displayed message and touch the
[OK] key.
(4) Set the darkness of the background that will
remain with the [-] [+] keys.
3 levels are available. Touch the [-] key for a lighter
background. Touch the [+] key for a darker
background.
Here "1" is set for the lightest background.
(5) Touch the [OK] key.
Select the destination and press the [COLOUR
START] key.
This function cannot be used when the colour mode is set to
[Mono2].
Cancel scanning