Tray Settings - Sharp MX-5000N Quick Start Manual

Printing on an envelopes
The procedure for printing on an envelope is explained below. Only the
name and address side of an envelope can be printed on.
It is recommended that you do a test print to check the print result before
using an envelope.
1 Place paper in the bypass tray.
3 Select settings in the printer driver.
(1)
(2)
Print on the name
and address side
(3)
(4)
(5)

2 Tray Settings.

Tray Settings
Type
Envelope
Size COM-10
Paper Property
Fixed Paper Side Disable Duplex
Feeding Approved Job
Print
Copy
Type : Envelope
Size : Select the envelope size
(2) Select the size of the envelope in
"Paper Size".
(3) Select "Bypass Tray" from "Paper
Source" in "Paper Selection".
(4) Select [Envelope] in "Paper Type".
If needed, select the "Rotate 180 degrees"
checkbox ( ) in "Image Orientation" on the
[Main] tab.
Back
Bypass
Change
Disable Staple Disable Punch
Fax I-Fax Doc. Filing
111
5
5