Changing The Exposure And Original Image Type; Changing The Exposure And Original Image; Type - Sharp MX-5000N Quick Start Manual

CHANGING THE EXPOSURE AND
ORIGINAL IMAGE TYPE
Exposure and original image type settings can be selected as appropriate for the original.
The procedure for darkening the exposure and setting the original image type to "Text/Prtd. Photo" is explained
below.
The side to be scanned must be face up!
Scan Internet Fax Fax USB Mem. Scan
Address Book
Original Scan: Auto
Address Entry
Exposure Auto
(1)
Send Settings
Resolution 200X200dpi
Address Review
File Format PDF
File
Colour Mode Auto/Greyscale
Quick File
Special Modes
Preview
When Fax/I-Fax address is included,
exposure setting shared is selected,
and Original Image Type is disabled.
Scan/Exposure
Auto
Original Image Type
Manual
Text Text/
Prtd.Photo
(3)
Printed Photo
5 Photo
1 3
(4)
Moiré Reduction
1
Place the originals.
When using the document glass, place the original with the
side to be scanned face down.
2
Select settings in the touch panel.
PC Scan
A4 Send: Auto
(1) Touch the [Exposure] key.
PDF
Mono2
(2) Read the displayed message and touch the
OK
(2)
(3) Touch the [Text/Prtd. Photo] key.
OK
(4) Darken light colours with the
(5)
Text/Photo
Map
(5) Touch the [OK] key.
3
Select the destination and then press the
[COLOUR START] key or the [BLACK & WHITE
START] key.
[OK] key.
5 levels are available for the exposure. Darken light
originals with the key, and lighten dark originals
with the key.
key.
Cancel scanning
83