Sharp MX-5000N Quick Start Manual page 47

Whitening faint colours in copies (Suppress
Background)
Use this function to suppress light background areas of a copy image.
When making a copy of an original that has a light coloured background, this can be used to whiten the
background.
An image of this function is shown at the end of this manual.
Adjusting the colour (Colour Balance)
Use this function to adjust the colour balance in a colour copy. The densities of the four colours cyan, magenta,
yellow, and black can be adjusted.
An image of this function is shown at the end of this manual.
Adjusting the brightness of a copy (Brightness)
Use this function to adjust the brightness of a copy.
An image of this function is shown at the end of this manual.
Adjusting the intensity of a copy (Intensity)
Use this function to adjust the intensity of a copy.
An image of this function is shown at the end of this manual.
Checking copies before printing (Proof Copy)
Regardless of the number of copies
specified, this function initially prints
only the first set. After you have
checked the first set, the remaining sets
are printed.
Checking the number of scanned original sheets
before copying (Original Count)
The number of scanned original sheets
can be counted and displayed before
copying is executed. By allowing you to
check the number of original sheets
that were scanned, this helps reduce
the occurrence of copy mistakes.
5
sets
sheets
Scan
originals
4 sheets
Check
1 4
set sets
4
4 sheets
Check
45