Pre-Operation Check; Precautions Before The Operation; Routine Check; Prevent Damage To The Plastic Surfaces And Painted Surfaces - Cub Cadet Sc2400 Operator's Manual

6. PRE-OPERATION CHECK

1. Pre-Operation Check
●Check the tractor for damage, excessive wear, cracks, missing parts,
exposed wiring and any other problems, including leaks.
●Check the joints and connections for looseness.
●Check that all the lights illuminate.
●Check that all the safety-alert decals are in correct position.
If any problem is detected, contact your local Cub Cadet Yanmar dealer,
and correct the problem. NEVER operate the tractor when a problem has
been indicated.

2. Precautions before the Operation

●ALWAYS be aware of the limitations of the performance of the tractor.
●Operate the tractor, keeping in mind "SAFETY FIRST!".

3. Routine Check

●Check the safety features.
●Check the tire pressure.
●Check that the remaining diesel fuel is sufficient for the intended
operation.
●Check the engine oil level.
●Check the transmission/hydraulic oil level.
●Check the coolant level.
●Remove grass clippings and debris from the tractor.
●Clean the air cleaner element.
●Check the tractor for any leaks such as oil, coolant and fuel.
●Check the radiator for possible blockage.
●Check the retractable seat belt and the Roll-Over Protective Structure
(ROPS) for any problem.
If any problem is detected, contact your local Cub Cadet Yanmar dealer
and correct the problem.

4. Prevent Damage to the Plastic Surfaces and Painted Surfaces

●Only wipe off the tractor after washing.
●Chemical agents such as pesticides can damage the plastic surfaces and
painted surfaces. NEVER spray chemical agents near the machine.
●NEVER spill diesel fuel onto the tractor. Diesel fuel can damage the
plastic surfaces and painted surfaces. ALWAYS wipe up spilled diesel
fuel immediately.
6. PRE-OPERATION CHECK
6-1
Sc2400 Operator's Manual