Cub Cadet Sc2400 Operator's Manual page 45

5. Set the range gear lever to the Slow
position.
(A) Range gear lever
(a) Slow position
6. Turn off the Power Take Off (PTO)
switch.
Push in and set the Power Take Off (PTO) switch to
the OFF position.
(A) Power Take Off (PTO) switch
(a) OFF position
(b) ON position
7. Fully push the 3-point hitch control/
cutting height adjustment lever
forward to the lowest position and
lower the mid- or rear mounted
implements to the ground.
(A) 3-point hitch control/cutting height
adjustment lever
(a) Lowest position
! WARNING
! WARNING
●In order to prevent a turnover accident,
completely lower the implements to the
ground.
7. OPERATE THE ENGINE
3014919a
3014919g
3014926
3014918b
7-4
(a)
(A)
(a) (b)
(A)
(a)
Sc2400 Operator's Manual
(A)