Check The Safety Interlock System - Cub Cadet Sc2400 Operator's Manual

■ Check the Safety Interlock System

! WARNING ! WARNING
To avoid personal injury, do as follows:
●Read the "Safety Precautions" in the front of
this manual.
●Read the danger, warning and caution
statements on the safety-alert symbols on the
tractor.
●To avoid possible poisoning from exhaust
fumes, NEVER operate the engine in an
enclosed place that lacks adequate ventilation.
●NEVER start the engine while standing on the
ground. ALWAYS start the engine from the
operator's seat.
●Before starting the engine, ALWAYS set the
forward and reverse drive pedal to the
"NEUTRAL" position and the Power Take Off
(PTO) switch to the "OFF" position.
Check the following points to be sure that the
machine is in the normal state and ready to start.
If a fault is detected on the machine, do not operate
the machine and contact your local Cub Cadet
Yanmar dealer for technical assistance.
Before checking the safety interlock system, perform
the following procedure.
1. Sit on the operator's seat.
2. Park the tractor safely on a solid, flat, level
ground.
3. Engage the parking brake securely.
4. Turn off the Power Take Off (PTO) switch.
5. Set the forward and reverse drive pedal to the
NEUTRAL position.
6. Stop the engine.
1. Power Take Off (PTO) Safety Switch
1. Pull up the Power Take Off (PTO) switch to set it
to the ON position.
2. Turn the key to the START position.
3. Make sure that the starter motor does not crank.
4. Turn the key to the OFF position.
5. Push in the Power Take Off (PTO) switch to set it
to the OFF position.
6. Turn the key to the START position.
7. Make sure that the starter motor starts running.
(A) Power Take Off (PTO) switch
Sc2400 Operator's Manual
14. PERIODIC SERVICE
3014919c
14-13
(A)